Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Spade crews are already moving. We dispatch Spade units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.
Too many Spade, TX families have called a big national number only to get bounced through hold music before a random subcontractor shows up hours later, so Hirex Water Damage built its Spade operation differently. Every technician on our Spade roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Water Removal in Spade isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Spade, TX, so you're protected from the moment our truck pulls into the driveway.
Because our equipment lives in a Spade, TX warehouse rather than out of state, we're not waiting on a supply run before we can start extraction.
Anyone in Spade who has had a supply line fail overnight knows the real cost isn't the leak itself, it's how long the standing water sits before someone with the right equipment arrives. That's the gap Hirex Water Damage was built to close, one Spade call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Spade started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Spade dispatcher will give you an honest read on urgency, not a sales pitch.
We size the Spade response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
Our Spade units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
For families in Spade, this covers flood-cut drywall removal, subfloor evaluation, and packing out salvageable belongings for cleaning, with clear photo documentation at every stage for your insurance claim.
For commercial Spade accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
When a Spade job involves sewage backup, our team suits up in full PPE, applies EPA-registered antimicrobials, and safely disposes of porous materials that can't be saved.
On top of standard drying, our Spade crews treat affected materials to reduce mold risk and will be upfront if a section needs specialist remediation.
We quote the job before equipment gets plugged in, so there's no surprise line item buried in the final invoice.
Because our equipment cache sits inside Spade, TX, most Spade calls see a technician on-site in under 60 minutes.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
If moisture readings aren't where they should be at the end of the job, we come back and keep drying at no extra charge.
A short call with our Spade dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
A licensed technician heads to your Spade address with extraction and drying equipment already loaded.
Extraction happens immediately, followed by a moisture survey that tells us precisely where the drying equipment needs to go.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
We measure moisture with instruments, not guesswork, and we won't sign off on a Spade job until those readings match the dry standard for the materials involved. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Spade work order, not just in an ad. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"I didn't touch the claim paperwork once. They sent it straight to the adjuster with photos and moisture logs attached." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Because our equipment is staged inside Spade, TX, most Spade calls see a technician on-site within 60 to 90 minutes of the initial call.
Yes — every Spade job gets a written estimate before equipment is turned on, and we walk through it with you line by line.
Around-the-clock coverage in Spade includes extraction, drying, and Category 3 sewage response — nothing on that list waits for morning.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Spade insurance claim.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
We regularly handle sewage backups in Spade using full containment, PPE, and EPA-registered antimicrobial products.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Spade tech confirms it's safe.
Yes, we regularly respond to commercial and multi-unit losses in Spade, including retail, restaurants, and office space.
Typical drying time runs 3-5 days for a Spade home, though a job that sat unaddressed longer can take longer to fully dry.
Quick extraction and drying in Spade significantly lowers mold risk, since spores need sustained moisture over roughly a day or two to establish.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
See the zip codes and nearby cities listed below — our Spade crews cover that full radius.
Beyond Spade itself, our coverage extends across nearby zip codes, with additional Spade, TX crews available for large-scale or commercial losses. If your address falls inside or near Spade, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Spade, Spade, TXReach our Spade line directly and get a technician on the way today.
Call +1-844-578-1604